Hangman Picture Frame Mounting System

Hangman Picture Frame Mounting System


The American Frame Hangman Frame Hanging System.
You’ll need two tools for assembly: a handheld drill with a 3/16 in drill bit and a Phillips
head screw driver. First, place the provided bubble in the track
of the track of the metal wall mounting section for easy leveling.
While leveling the wall mounted section, mark the holes with a pencil carefully.
Now you can drill the five holes needed to mount the wall mounted section.
Take the provided yellow wall anchors and push them into the drilled holes.
Now take the metal wall mounting section, a Phillips screwdriver, and the provided screws
and proceed to mount it on the wall. Now mount the frame mounting section to the
back of your frame. Make sure the beveled end faces toward the
bottom of your frame. If the wood is soft, you can drill the screws
in by hand. Hanging your artwork securely is a snap with
the hangman mounting system. The Hangman Picture Mounting System. The Hangman.
Buy your today at AmericanFrame.com

Leave a Reply

Your email address will not be published. Required fields are marked *